Our Location
No. 106, No. 43 Taohua Park Front Road, Shima, Junhe Street, Baiyun District, Guangzhou, China, 510440

PP Jar Customization for Skincare Brands
Build a coordinated PP jar range with Pantone-matched colors, silk screen printing, hot stamping and selected special finishes. Custom molded-color projects can start from 3,000 pieces on suitable models.
Final MOQ and printable area depend on the jar model, capacity, color plan, artwork and decoration process.
Pantone reference
From 3,000 pcs
Silk screen and foil stamping
Typically 10-15 days
Separate colors possible
The approved physical sample, rather than a screen preview alone, becomes the final color and decoration standard for production.
Most PP jar models can be customized, but the best process depends on the surface, curvature, lid structure, artwork and required quantity.
Pigment is added during PP molding so the jar or lid is produced in the selected color. Both the jar and lid can use Pantone references, including different colors for a two-tone pack.
Typical MOQ: from 3,000 pieces for one custom color on selected models.
Spray coating can create custom color, matte, glossy or other surface effects when the selected jar structure and project requirements support the process.
Typical MOQ: 5,000 pieces per color. Selected 3,000-piece projects may be possible at a higher unit cost.
Best suited to brand names, simple logos and solid-color artwork. One or two colors are usually the most practical. Additional colors are possible but add setup and production cost.
Gradient artwork, photographs and highly complex graphics are not recommended for silk screen printing.
Use gold, silver, rose gold or other available foil colors for metallic logos and accents. The jar body and lid can be decorated separately when the selected surfaces allow it.
Curved, ribbed or highly detailed surfaces require an artwork and model review before approval.
Labels are useful when the design contains gradients, photographs, frequent artwork changes or information that is difficult to reproduce with direct printing. Label artwork is normally prepared in CMYK.
Matte, glossy, electroplated, UV and other decorative effects can be discussed case by case. Some jar models already have molded matte or glossy surfaces, while others use surface treatment.
For a material-wide explanation of these processes, visit our cosmetic packaging printing and decoration guide.
Selected PP jar projects can split the order across coordinated colors or artwork versions without requiring 5,000 pieces for every color.
2,500 pcs per color
Total 5,000 pieces using the same jar model and capacity. Suitable for two scents, formulas or coordinated brand colors.
2,000 pcs per color
Total 6,000 pieces using the same jar model and capacity. A practical route for launching a coordinated three-SKU product line.
From 5,000 pcs total
For one model, capacity and color, the order may be divided across two or three silk screen artwork versions. Additional setup cost applies.
Important: different capacities use different molds and cannot be combined to meet one color MOQ or share one printing setup.

Send the Pantone reference for molded or spray-coated jar colors. The jar and lid can use the same color or separate colors, depending on the selected model and project plan.
Color is adjusted through a physical production process, so the approved sample becomes the final standard. Digital screens and Pantone references guide the match but do not replace sample confirmation.
Artwork needs to fit the physical surface of the selected jar. We review the design before confirming the process and printable area.


Artwork formats: AI, editable PDF or EPS vector files are preferred. If you do not have production-ready artwork, design assistance can be discussed after the custom sample project is confirmed.
Use real samples to review color, logo scale, foil finish and how multiple SKUs work together as one product line.






Confirm the model, capacity and required quantity.
Available stock samples are free; freight is paid by the customer.
After the sample project is confirmed, receive the dieline and submit the design.
We review the logo file and adjust it into a production-ready layout for approval.
Custom color and logo samples are charged according to the selected model and process.
The signed physical sample becomes the color and decoration standard.
Production starts after the jar, artwork, sample and commercial details are confirmed.
Sample timing: custom samples typically require 10-20 days depending on the jar and process. Hot stamping may add approximately five days. Sample fees may be refunded or credited for qualifying orders above 10,000 pieces, subject to confirmation.
Customized PP jars are checked against the approved sample during production. These are production quality checks, not laboratory certifications.
Finished jars can be placed in individual protective bags and packed with inserts to reduce contact and help protect the printed or foil-decorated surfaces during handling and shipment.
Explore the full PP cosmetic jar collection.
Custom colors and logos for scrub packaging.
Coordinate toner pad jars across multiple SKUs.
Build branded body butter jar collections.
Selected molded-color PP jar projects can start from 3,000 pieces for one color. Spray-coated projects normally start from 5,000 pieces per color, although selected 3,000-piece projects may be possible at a higher unit cost.
For selected projects using the same jar model and capacity, two colors may start from 2,500 pieces per color, while three colors may start from 2,000 pieces per color. Final feasibility depends on the model and color plan.
For a 5,000-piece order using the same jar model, capacity and color, silk screen printing may be divided across two or three artwork versions. Additional setup cost applies.
Yes. The jar and lid can use separate Pantone color references when the selected model and production plan support the combination.
Translucent PP effects are possible on suitable models. Fully transparent PP jars are not offered.
AI, editable PDF or EPS vector files are preferred. The final printable or stamping area depends on the selected jar model and artwork review.
Custom samples typically require 10-20 days depending on the jar model and decoration process. Hot stamping may add approximately five days.
Yes. Pantone references and digital previews guide the process, but the approved physical sample becomes the final production color standard.
No. Different capacities use different molds and production setups, so they cannot be combined to meet one color MOQ or share one printing setup.
Finished jars can be placed in individual protective bags and packed with inserts to reduce surface contact during handling and shipment.
Send the jar model or capacity, total quantity, number of colors, Pantone references, artwork versions, logo file, required decoration and destination country. We will review the feasible process, MOQ and sample plan.